How to set the PrintServer's IP address automatically

1. Display the PrintServer's Advanced Configuration web page.
   The TCP/IP Settings web page is displayed.
2. Check Enable TCP/IP.
3. Select Automatic.
4. Check one or more of the three protocols as you require.
   Note: By default, the PrintServer has TCP/IP enabled, Automatic lookup method, and all three protocols enabled. In this case the first server type to respond determines the TCP/IP configuration when the PrintServer is started up.
5. Click Save & Continue.

• How to edit TCP/IP settings
• How to set the PrintServer's IP address manually
• How to reserve the PrintServer's IP address on a DHCP server