Quick Guide

Installation

1. Power off your printer. Connect the PrintServer to the parallel port of the printer and secure it using the two mounting clips. Connect network cable to the RJ45 port on the rear panel of the PrintServer.
2. Connect the power adapter (5.5Vdc, 650mA) to the power outlet and to the PrintServer. Power on the printer.
3. The complete Installation Guide will be printed.
   
   Note: If nothing is printed, please check that the printer is on-line, not in an error condition (i.e. paper out, toner low, etc.), and that the PrintServer is securely connected to the parallel port.

Generate settings printout

1. Press the blue TEST button on the right side of the PrintServer.