Quick Guide

CAUTION

Static electricity can damage the HostCom™ EIO. You should either wear an anti static wrist wrap, or frequently touch the metal surface of the printer.

Printer memory

Prior to starting installation, we recommend that you print a configuration sheet to verify that your printer has enough memory to support the HostCom™ EIO.

Pre-installation task

1. Ensure that the printer's language is set to PCL.

Install interface in printer

For installation of your HostCom™ EIO, please see one of the following references:

1. The enclosed User’s Guide
2. The relevant documentation supplied with your printer.

Install IPDS DIMM in printer

If an IPDS DIMM was supplied with your HostCom™, please see one of the following references:

1. The enclosed User’s Guide
2. The relevant documentation supplied with your printer.

Generate settings printout

1. Power on printer.
2. Press the TEST button on the HostCom™ to get a setting printout.

Connect to host

1. Power off printer.
2. Connect Coax cable to the HostCom™.
3. Power on printer. The green LED for CU on the back of the HostCom™ should light.