|
How to set up IPDS printer on HP Jetdirect port 9100. For AS/400 ver. 4.3
Device Description and PSFCFG configuration to use with IPDS DIMM and JetDirect card
Requirements:
Before IPDS printing using TCP/IP can be accomplished, the following points need to be checked:
- TCP/IP is installed and enabled
- The relevant PTFs are applied
Details on how to verify these items can be found on the Internet.
Consult the following IBM web address for details:
http://as400service.rochester.ibm.com
In the Technical Information database, you find the following links:
This link directs you to the area of the Knowledge Base, which is specifically about Print.
IBM Doc. No. 8414724, PTF Listing for AFP Printing is a good entry.
- Preventive Service Planning (PSP)
This link directs you to the area of the Knowledge Base about Cumulative PTF Package for all OS/400 versions. IBM Doc. No. 8203740, PTF Listing for TCP/LAN Printing is a good entry.
HP settings:
Default IPDS port in JetDirect card is: 9100
Set the IP, Subnet Mask and Gateway address on the JetDirect card.
The printers PS wait time-out shall be set to 300 sec.
The JetDirect card's IDLE TIMEOUT shall be set to 3600 sec or 0 (zero). Refer to our FAQ for a description of the consequences. Remember to power cycle printer to enable new settings.
AS/400 settings:
At the AS/400 command line, enter a command in the form:
CRTDEVPRT DEVD(HP_IPDS) DEVCLS(*LAN) TYPE(*IPDS) MODEL(0) LANATTACH(*IP) AFP(*YES) PORT(9100)
FONT(11) FORMFEED(*AUTOCUT) RMTLOCNAME('192.194.134.90) USRDFNOBJ(AFP/NETWRKPRT *PSFCFG)
TEXT('IDATA IPDS DIMM')
A completed screen looks like this:
Display Device Description Page 1
5716SS1 V4R3M0 981108 BLDRB1 09/11/98 12:02:59
Device description . . . . . . . . : DEVD HP_IPDS
Option . . . . . . . . . . . . . . : OPTION *ALL
Category of device . . . . . . . . : *PRT
Device class . . . . . . . . . . . : DEVCLS *LAN
Device type . . . . . . . . . . . .: TYPE *IPDS
Device model . . . . . . . . . . . : MODEL 0
LAN attachment . . . . . . . . . . : LANATTACH *IP
User-defined object . . . . . . . .: USRDFNOBJ NETWRKPRT
Library . . . . . . . . . . . . . .: AFP
Object type . . . . . . . . . . . .: *PSFCFG
Data transform program . . . . . . : USRDTATFM *NONE
User-defined driver program . . . .: USRDRVPGM *NONE
Advanced function printing . . . . : AFP *YES
Port number . . . . . . . . . . . .: PORT 9100
Online at IPL . . . . . . . . . . .: ONLINE *YES
Font . . . . . . . . . . . . . . . : FONT
Identifier . . . . . . . . . . . . : 011
Point size . . . . . . . . . . . . : *NONE
Form feed . . . . . . . . . . . . .: FORMFEED *AUTOCUT
Separator drawer . . . . . . . . . : SEPDRAWER *FILE
Separator program . . . . . . . . .: SEPPGM *NONE
Library . . . . . . . . . . . . . .:
Printer error message . . . . . . .: PRTERRMSG *INQ
Message queue . . . . . . . . . . .: MSGQ QSYSOPR
Library . . . . . . . . . . . . . .: *LIBL
Activation timer . . . . . . . . . : ACTTMR 170
Maximum pending requests . . . . . : MAXPNDRQS 6
Print while converting . . . . . . : PRTCVT *YES
Print request timer . . . . . . . .: PRTRQSTMR *NOMAX
Form definition . . . . . . . . . .: FORMDF F1C10110
Library . . . . . . . . . . . . . .: *LIBL
Remote location . . . . . . . . . .: RMTLOCNAME
Name or address . . . . . . . . . .: '194.192.134.90'
Dependent location name . . . . . .: DEPLOCNAME *NONE
Text . . . . . . . . . . . . . . . : TEXT IDATA IPDS DIMM
User-defined options . . . . . . . : USRDFNOPT
-----------------User-defined options------------------
Configuring AS/400 for IPDS printing on V4R3
On the AS/400 command line, enter a command in the form:
CRTPSFCFG PSFCFG(AFP/NETWRKPRT) IPDSPASTHR(*YES) RLSTMR(*SEC15) TEXT('IDATA IPDS DIMM*)/
A completed screen looks like this:
PSF Configuration Information Page 1
PSF configuration: NETWRKPRT Library: AFP
User resource library . . . . . . . . . . . . . : *JOBLIBL
IPDS pass through . . . . . . . . . . . . . . . : *YES
Activate release timer . . . . . . . . . . . . .: *NORDYF
Release timer . . . . . . . . . . . . . . . . . : *SEC15
Restart timer . . . . . . . . . . . . . . . . . : *IMMED
SNA retry count . . . . . . . . . . . . . . . . : 2
Delay time between retries . . . . . . . . . . .: 0
Blank page . . . . . . . . . . . . . . . . . . .: *YES
Page size control . . . . . . . . . . . . . . . : *YES
Resident fonts . . . . . . . . . . . . . . . . .: *YES
Resource retention . . . . . . . . . . . . . . .: *YES
Edge orient . . . . . . . . . . . . . . . . . . : *NO
Remote location:
Name or address . . . . . . . . . . . . . . . . : *NONE
TCP/IP port . . . . . . . . . . . . . . . . . . : *NONE
TCP/IP activation timer . . . . . . . . . . . . : 170
PSF defined options . . . . . . . . . . . . . . : *NONE
Text description . . . . . . . . . . . . . . . .: IDATA IPDS DIMM
Device resource library list . . . . . . . . . .: *DFT
Note: The lines in bold in the above screen are not used by PSF/400. Instead, PSF/400 uses the information entered in the device description screen.
Then do the following:
Ping the IP address to verify communication with the printer:
PING ’192.194.134.90’
Vary the printer on:
VRYCFG HP_IPDS CFGTYPE(*DEV) STATUS(*ON)
Start the print writer:
STRPRTWTR HP_IPDS
|
Site map 
