How to configure the PrintServer using FTP

Once you are logged on to the PrintServer with an FTP connection, you can perform any of the following tasks:

Configure the PrintServer

get config/current.cf2

The configuration file (current.cf2) is stored directly under C:\. Once you have modified the configuration in, for example, Notepad, you can copy it back to the PrintServer. Type:

put current.cf2 config/current.cf2

Restore factory default configuration

To restore factory default configuration you must transfer a file named factory.cf2. Type:

put factory.cf2 config/factory.cf2

Restart the PrintServer

To restart the PrintServer, type:

get config/restart

Retrieve the status of the PrintServer

To retrieve the status (as a text file), type:

get config/status.txt

See also:

• How to work with the PrintServer file system
• How to print using FTP