How to disable the test button

This describes how to prevent users from restoring the PrintServer's factory default settings by pressing and holding the PrintServer's TEST button.

1. Start PrintGuide™
2. Right-click the PrintServer and select Backup Configuration and save the Configuration file on your hard disk.
3. Open the Configuration file in an editor and search for the text "TESTBUTTON_RESET".
4. Change the setting from "YES" to "NO".
5. Save the Configuration file on your hard disk.
6. Go back to PrintGuide™
7. On the File menu, click Open to open the configuration file on your hard disk.
8. On the Configuration menu, click Copy Configuration to... and select the same PrintServer as previously and click OK.